Description: BK LOGIC PULSER AND LOGIC PROBE - When testing or troubleshooting digital logic circuits, the pulser and probe should be used together.The logic pulser is designed to inject a square wave signal into a digital logic circuit, and the logic probe is designed to detect that same pulse elsewhere in the circuit. For properly designed logic circuits, the probe will validate the results, either HI or LOW, predicted by the design. The logic pulser can be switched to produce a pulse rate of either 400 pulses per second or 0.5 pulses per second. At the 400 pps setting, the pulses may be detected using the logic probe or an oscilloscope. The pulser also has the option to generate a pulse using an input from an external device or circuit. This would be the "EXT SYNC" pin on the pulser. The logic probe has no adjustments, simply HI and LO indicator LED's. Both devices have alligator clips to connect to an external power source. The voltage should be +5 volts for TTL logic (Transistor-Transistor-Logic) or +4 - +18 volts for CMOS logic (Complimentary Metal-Oxide Semiconductor)Both devices are listed as used, but both have been used very infrequently and are in great condition.
Price: 10 USD
Location: Ocean View, Delaware
End Time: 2024-11-04T03:00:01.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: B&K Precision
Product: Logic Pulser and Logic Probe - Two for One Price
