Bendpak HD-7P 7,000 Lbs Extra-Tall 4-Post Lift

Description: BendPak HD-7P 7,000-lb. Capacity Short Runways Extra-Tall 4 Post Lift 7,000-lb. Capacity / Narrow Car Lift / High Rise The HD-7P is a 7,000-lb. capacity, narrow-configuration four-post lift. This model offers compact convenience, so it also helps maintain an open, fresh appearance in more spacious garages. The HD-7P does not require a special foundation, nor does it involve complicated installation procedures. It's simply the perfect service lift for shops or garages with limited floor space. This four-post lift is about the size of a typical parking space and fits nicely as a residential or commercial parking lift. The applications are endless, but what else would you expect from BendPak? After being in this business for over 50 years, our reputation is as solid as our lifts. If you've ever owned a BendPak four-post lift, you know that means a lot. Get the most out of smaller spaces and compact vehicles with BendPak's HD-7P four-post lift. This narrow lift shaves 10.5" off the overall width of the lift, as well as the width between the columns. If you want a 7,000-lb. capacity four-post lift but can't sacrifice the precious inches taken up by the HD-7W, this is the car lift for you. Store classic cars, racers and compact vehicles comfortably and safely. Features 7,000-lb. maximum lifting capacity. High lift with short runways. Electric / hydraulic power system. Single hydraulic cylinder mounted underneath runway. Internal anti-sway slider blocks in each column. Oversized self-lubricating cable rollers. High-speed lifting. Features heavy-duty 3/8" aircraft cable. Rugged 1.25" roller axles. Multi-position safety locks in each column. Adjustable lock ladders. Ramps feature non-skid surface. Push-button pneumatic safety release. Optional 4,500-lb. capacity rolling jack available (Model RJ-45). Specifications Lifting Capacity 7,000 lbs. (3,175 kg) *Max Capacity / Front Axle 3,500 lbs. (1,588 kg) *Max Capacity / Rear Axle 3,500 lbs. (1,588 kg) A - Min. Runway Height 4.5" (114 mm) B - Max. Rise 82" (2,083 mm)) C - Max. Lifting Height 86.5" (2,197 mm) D - Overall Width 100.25" (2,546 mm) E - Outside Length 174" (4,420 mm) F - Overall Length 200" (5,080 mm) G - Height of Columns 100" (2,540 mm) H - Width Between Columns 90.25" (2,292 mm) I - Drive-Thru Clearance 76.5" (1,943 mm) J - Runway Width 19" (483 mm) K - Length of Runways 164" (4,166 mm) L - Width Between Runways 37.5" (953 mm) or 44.375" (1,127 mm) M - Runway Centerline 56.5" (1,435 mm) or 63.375" (1,610 mm) N - Outside Edge of Runways 75.5" (1,918 mm) or 82.375" (2,092 mm) Rated Capacity 115" (2,921 mm) 75% Capacity 100" (2,540 mm) 50% Capacity 85" (2,159 mm) 25% Capacity 70" (1,778 mm) Locking Positions 15 Lock Spacing Every 4" (102 mm) Motor 220 VAC / 60 Hz / 1 Ph Noise 45 dB Shipping Weight 1,794-lbs. (813.8 kg) Shipping Dimensions 166'' x 22'' x 42'' (4,203 mm x 559 mm x 1,066 mm) Time to Full Rise 35 seconds Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply. * This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page. ** Special Voltages Available Upon Request The design, material and specifications are subject to change without notice. Optional Accessories (*Sold separately) WSA-100 DP-30 Downloads Manual Brochure **Bendpak charges sales tax in California** ***It is the buyer's responsibility to unload the freight at their location.

Price: 5376 USD

Location: Dover, Delaware

End Time: 2025-01-21T17:58:48.000Z

Shipping Cost: 0 USD