Battery Tester Power Electronic Load Voltage Pack Capacity Monitor USB Checker

Description: Battery Tester Power Electronic Load Voltage Pack Capacity Monitor USB CheckerItem DescriptionFile Download Way and DIY 150W~600W（200V & 3mA~25A/30A/35A/40A） 1, User manual, PC software installation instruction and PC software and Android APP download 2, IOS APP: search E_test on iphone APP store to download 3, Android APP: search E-test at Google play to download 4, DIY 150W/DIY 300W/DIY 450W/DIY 600W(V*AProduct Parameter Electrical parameters (V*AProduct jumper position and Setting method(150W~600W) (DIY 150W / DIY 300W / DIY 450W / DIY 600W) When product leave the factory, the default is: 150W (the jumper has been set to 150W) When this product is at different powers, you need to set the jumper, please follow the following method to set！ @150W 3mA~25A (V*A<150W) @300W 3mA~30A (V*A<300W) @450W 3mA~35A (V*A<450W) @600W 3mA~40A (V*A<600W)Two kinds of 1mA or 10mA current test gear Operation method: Long press the "ON/OFF" Button to enter the background, press the "M" Button, select 05 item: Precision of current: O10mA ●1mA, set by "+" or "-" (Tips: Start the test with a minimum of 3mA)Introduction to the key operation of frequently used functions 1)Short press the “ON/OFF” button to start and stop, short press the upper left corner of the "M" button to move the cursor and then adjust the corresponding value with the "+/- " button 2) Long press the "+/- " button at the same time to clear all accumulated data such as the current capacity, battery time, etc. (Long press the "ON/OFF" button to enter the background ，also can be cleared in the background menu) 3) Long press the “M” button and the function mode starts to flash, then short press the “+/-” button to select the function (CC/CV/CR/CP/BRT/PT) 4) In OFF mode, long press the "ON/OFF" button to enter the background interface, then short press the "M" button to switch the setting column, and the "+/-" button to adjust the number 5) Short press the "+/-" button in the constant current accuracy column of the background setting interface to switch the constant current accuracy (10mA Or 1mA) 6) When the system is not supplying power, press and hold the "M" button and do not let go. Then power on again. Enter the splicing power option and jump to the actual power value before let go 7) Long press the "M" button the function mode starts to flash, short press the "M" button again to enter the setting adjustment value of the time-limited discharge and Cut off voltage column valuePanel Main buttons and description Ⅰ：Bluetooth indicator（Flashing waiting for Bluetooth connection，Long light indicates successful connection） Ⅱ："+" Vave Increase Button（Short press the button to increase the number, long press the button to increase continuously, When the mode is flashing, short press the button to cycle backwards） Ⅲ："M" Set Buton（Long press "M" key to start function mode, press "+" or "-" key to switch CC/CV/CP/CR/BRT/PT mode, long press "M" key to start function mode, short press "M" again Key to switch between Time Discharge and Cut off voltage. Press the "+" or "-" key to set the value, the default is OFF） Ⅳ："-" Value Reduce Buton（Short press the button to decrease the number and long press the button to decrease continuously. When the mode is flashing, short press to cycle forward） Ⅴ："ON/OFF" Run ON/OFF Button(Short press the button, it is ON or OFF Long press the button to enter the product background settings, and use the "M" button and "+" or "-" button to set the parameters）Host Parameters and description 1.Test various DC power inputs 2.MiNi USB detection port inputs 3.Micro USB detection port inputs 4.Type-c USB detection port inputs 5.DIY assembly Different power reserve jumper positions（150W/300W/450W/600W） 6.External NTC temperature probe 7.Straight needle seat XH2.54-2P port 8.Straight needle seat XH2.54-2P port 9.8p cable connected to the panel 10.DC5.5 system power supply (must supply DC12V 1A) 11.Increase the power and expand the interface 12.Resistor*4Seven operating modes of operation 1.Constant current operation（CC） 2.Constant resistance operation（CR） 3.Constant power operation（CP） 4.Constant voltage operation（CV） 5.Battery Internal Resistance Test Mode (BRT) 6.PT electrical parameters automatic test mode (PT) 7.CT Cable resistance test mode(CT)Technological innovation, simple splicing, 600W high-power aging test Real cost construction,4 radiator fans, 16 MOSFETs, increase the stability of the test！Test all kinds of data cables/chargers Test/discharge/aging/get it all Play and test various USB data cables/chargers, first use a data cable Connect the corresponding interface of the load, connect as shown in the figure below, when the load is turned on in the constant current mode Adjust the current so that the voltage drop is 1V less than the no-load condition The current value at this time is the current value of the measured data lineThrough testing various DC power adapters Play and measure the current, voltage, power and other parameters of various DC power adapters Use the DC power supply to connect the DC independent power supply port of the load meter, and then use the "Settings" button to connect as shown in the figure below. Precisely adjust the current to test the voltage and rated current of the power supply The DC power supply can also be aged for a long time, with strong functions, simple operation, convenient and quick testingIntelligent one-key full automatic detection of DC power supply PT mode of charger current power performance Press and hold the M button in the menu until the mode bar flashes, wait a while after pressing the ten-key PT mode Automatically enter the DC power supply/charger auto-detector mode, then plug in your tested power supply and Charger, then short press the start button, it will automatically start to run for a period of time and then report Displays 4 kinds of important numerical results, making complicated tests instantly simplified, accurate, and easy to useProtection settings 1.Overload protection 2.Overcurrent protection 3. High temperature protectionDevice background settings (Chinese / English settings) 1.Chinese settings 2.English settingsOTA firmware upgrade via Bluetooth1) Apple Mobile APP: Please search for E_test in the application store to download and install, then click the Bluetooth APP icon to open the software, and then click the Bluetooth icon above the software to enter the selection DL24-BLE to connect, you can achieve mobile phone remote wireless remote control settings and Measurement function, the discharge status can be viewed at any time on the mobile phone, various data cleaning is visible, the voltage and current power curve of the discharge, etc.2) Android phone APP: Scan the QR code on the back of the host to download the corresponding APP software or Android APP: search E-test at Google play to down load . After the installation is complete, open the software and click the Bluetooth icon to enter the direct selection of DL24-BLE to successfully use it online. (No need for Bluetooth pairing, the software Bluetooth icon directly selects DL24. can)3) Computer Bluetooth wireless online APP: First add the Bluetooth device to the serial port device of DL24-SPP on the computer, then scan the QR code on the back of the host to download the corresponding APP software and store it. Open the software without installing and select the Bluetooth serial port model just added. You can successfully use onlineAbout SOFTWARE QUESTIONS: 1. The APP crashes on my phone, what is the problem ? A: For APP and PC software, because there may be incompatibilities problems, please download first before buying , if you can download and install, you can place order, or else do not purchase. For PC software, it only support win 7 and Win 10 above for now. For APP, it only support android 5.0 and above.2. Why are there _BLE and _SPP modes and which one to choose? A：Our APP adopts the latest connection technology, please do not pair in Bluetooth mode, directly click on the E-test (Android APP name) APP provided by us, click the Bluetooth symbol, E_test (Apple APP) select the _BLE Bluetooth name to proceed connect, that's it ok! _BLE:is connected in mobile mode _SPP:is connected in PC computer mode 3.What is the computer pairing password? A：Password is "0000" or "1234" 4.Does it support WIFI mode? A：No support, connected via wireless bluetooth mode！ 5.Why does the mobile phone appear blank when opening your APP, and the signal list of _BLE cannot be displayed? A：Please turn on the GPS positioning of your mobile phone, or in the mobile phone settings, find our APP, open the location information or storage information permission, again reconnect, that's it ok!Product size and description150W Product list 1.DL24MP -150W Color Display Bluetooth Digital Control Curve Version Load Tester x1 2.DC12V 1A power supply x1 3.Male and female screws X 6pcs/sets 4.Temperature probe x1 5.Red and black single line crocodile clip line x1 6.US to EU adapter x1300W product list 1.DL24MP-150W Host Color Display Bluetooth Digital Control Curve Version Load Tester x1 2.DC12V 1A power supply x1 3.Male and female screws X6pcs /sets X2 4.Temperature probe x1 5.Red and black single line crocodile clip line x1 6.US to EU adapter x1 7.150W fan accessories X1450W product list 1.DL24MP-150W Host Color Display Bluetooth Digital Control Curve Version Load Tester x1 2.DC12V 1A power supply x1 3.Male and female screws X6pcs/sets X3 4.Temperature probe x1 5.Red and black single line crocodile clip line x1 6.US to EU adapter x1 7.150W fan accessories X2600WP product list 1.DL24M-150W Host Color Display Bluetooth Digital Control Curve Version Load Tester x1 2.DC12V 1A power supply x1 3.Male and female screws X6pcs/sets X4 4.Temperature probe x1 5.Red and black single line crocodile clip line x1 6.US to EU adapter x1 7.150W fan accessories X3 PaymentPlease ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled. ShippingOnce we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.ReturnWe offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.

Price: 68.47 USD

Location: Shenzhen

End Time: 2024-08-25T20:32:32.000Z

Shipping Cost: 0 USD