Description: AUTOPILOT HYDRAULIC PUMP BRAND NEW AND BOXED WITH 2 YEARS WARRANTY This is the 0.8 litre 12 Volt version suitable for cylinder sizes from 100cc to 160cc Designed specifically for the marine autopilot market and backed with over 30 years of continuous development the new range of reversing pumps presents the ultimate in quiet and smooth operation. Unlike noisy piston pump designs the precision gear form delivers smooth flow in all conditions and with minimal noise. Now with IP67 (submersible to 1 metre for 30 mins) maintenance free motors with internal brushes that have a 4000+ hour brush life these latest generation of power units are the best available and used by many of the worlds leading autopilot manufacturers. Download Full Specification NORMAL RETAIL PRICE IS IN EXCESS OF £500.00 MANUFACTURED IN THE UK WITH FULL SERVICE & SUPPORT All autopilots work on the same principle, they can steer the boat because they expect the rudder to move at a certain speed, whilst the rudder feedback indicates the position of the rudder the actual speed of movement is governed by the flow rate of the pump. Too fast and the pilot will oscillate or over shoot the desired setting and the boat "snake" out of control. Too slow and the boat will drift off course before the pilot has any effect. Of course there are always electronic adjustments within the pilot itself, and some allow you to control the speed of the pump, but these have limits and the rudder speed needs to fall within a certain parameters to give the electronic settings scope to cope with different sea states. The rudder speed is measured as the time it takes to get from full lock port to full lock starboard, known as the "Hard over to Hard over" time. For all pilots, regardless of manufacturer, this time is 7.5 secs to 12.5 secs (Some manufactures may quote times out side these and their pilots will work but at the extremes the amount of electronic adjustment available for sea state changes is considerably reduced). Auto learning pilots are particularly sensitive to hard over time. To achieve this ideal time the pump needs to be matched to the cylinder, for example a 1 litre per min pump (Raymarine Type 1 or our PR10) delivers 16.66cc per sec so would give a hard over to hard over time of 9 secs with a 150cc cylinder (Teleflex/Morse BA150) but you would need a Type 2 or PR20 if your cylinder was 300cc to achieve the same time. SUITABLE FOR USE WITH ANY MODERN AUTOPILOT INCLUDING RAYMARINE (TYPE 1 & 2 COURSE COMPUTERS, S1, S2, S3 AND "G", S1000 ETC), SPX, ACU200, SIMRAD, CETREK AND NAVMAN The Service Centre is the largest independent marine electronics service facility in Europe providing service and repair facilities directly to companies such as Simrad, Navico, Navman, MX & Cetrek and are authorised service agents for many more including Raymarine & Icom. We have specialist workshops and equipment supplied or approved by the manufacturers along with factory trained engineers and an extensive stock of spare parts - see our ebay shop and other listings for details.
Price: 330 GBP
Location: Poole
End Time: 2023-09-29T14:04:03.000Z
Shipping Cost: 56.21 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Return policy details: All items are used/pre-owned or ex display & fully tested before listing unless otherwise stated. Returns accepted only if item is faulty on arrival and refunds given only if item is returned undamaged. Items described as new but are discontinued or clearence stock carry our own 3 month warranty unless otherwise stated. New Items, where stated, have full manufacturers warranty through us as their authorised service agents.
Country/Region of Manufacture: United Kingdom
Manufacturer Part Number: PR0812
Brand: Hydraulic Projects
