Authentic Anderson Powerpole Connector - 10 Sets

Description: Authentic Anderson Powerpole Connector - 10 Sets - PP15 (15A) A "Set" includes all the parts needed for a single connector. This pack of 10 sets includes: (10) Black Housing (10) Red Housing (20) Contacts All orders are processed same day and ship from California as soon as possible. Product Attributes: Mates with all 15, 30, & 45 Amp Anderson Powerpole connectors Voltage Rating: 600V Maximum Current Rating: 15A continuous Contact Material: Silver-Plated Copper Connector Material: Polycarbonate (PC) Operation Temperature: -20C to 105C Recommended Crimping Tool: TRIcrimp 840128904381 Other Products Available for PowerPole! Carbon Composite Panel Mount Adapters for Anderson Powerpole: Single, threaded (2-pin): https://www.ebay.com/itm/255243451694 Single (2-pin): https://www.ebay.com/itm/255110070126 Double (2x 2-Pin): https://www.ebay.com/itm/255130856567 Quad (4-Pin): https://www.ebay.com/itm/255130876268 Carbon Composite Top Mount Adapters for Anderson Powerpole: Single (2-pin): https://www.ebay.com/itm/255143118769 Double (2x 2-Pin): https://www.ebay.com/itm/255143199381 Quad (4-Pin): https://www.ebay.com/itm/255143993969 Accessories For Anderson Powerpole: Connector Sets (15A): https://www.ebay.com/itm/255475339167 Connector Sets (30A): https://www.ebay.com/itm/255242486089 Connector Sets (45A): https://www.ebay.com/itm/255391876569 Assembled Cables: https://www.ebay.com/itm/255326817911 Facts About Powerpoles 15, 30, & 45 amp Powerpole connectors will mate with each other. The 15, 30, & 45 amp contacts all use the same housing. Therefore, they all connect to each other. The size of the flat contact area is actually the same for all contacts. The only difference between the 15, 30 & 45 amp contacts is the size of the receiving barrel that accepts the wire. 15 amp contacts are recommended for 20-16 gauge wire 30 amp contacts are recommended for 14-12 gauge wire 45 amp contacts are recommended for 10 gauge wire Powerpole connectors are both genderless and polarized connectors Powerpole connectors are genderless, meaning the supply and load connectors are the same. Since there are no male or female parts, all Powerpole connectors mate with themselves. Powerpole connectors become polarized when the red and black housings slide together via molded-in dovetails on the housings. Connections can be made quickly and easily, even in the dark. High current rating, low resistance The size of the wire a Powerpole contact will accept is the primary limitation of their ability to carry a load. The size of the flat contact area is actually the same for all 15, 30, & 45 amp contacts. Powerpole connectors will safely handle higher loads or surges, please read the PP30 data sheet for additional information. The contacts are made of highly conductive silver-plated copper for minimal contact resistance at high currents. The average contact resistance is 600 micro-ohms. Flat wiping contact system This system allows for minimal contact resistance at high current. The self-wiping action cleans contact surfaces during connection/disconnection. The contacts are rated at 10,000 no-load connect/disconnect cycles. When two pairs are mated together, it takes approximately 3 pounds of tension to pull them apart. Stainless steel spring Good connectors should not lose contact tension under use or vibration. Powerpole connectors use a stainless steel spring which applies 25 lbs. of pressure to hold the silver-plated copper contacts firmly together and maintain constant contact. This is ideal for frequent connect/disconnect cycles. Other cheaper connectors simply depend upon soft copper that eventually spreads apart and becomes loose. Durable polycarbonate housing The Powerpole insulated housings use a durable, high impact-resistant, high temperature polycarbonate plastic with a UL94 V-0 flammability rating. The connector design allows air to flow through the housing, assisting in cooling. Powerpole housings have a modular design that allows for multi-pole (multi-conductor) configurations. Housings slide together via molded-in dovetails. Need something else? Have a part that you can't find online? Need something special or custom? Message us today and talk directly with our in-house engineering and design team.

Price: 19.99 USD

Location: Fremont, California

End Time: 2024-08-06T22:55:15.000Z

Shipping Cost: 0 USD