Citronic

ARMI SAN MARCO SAA GRIPS ~ MAGNA-TUSK™ WHITE STAG

Description: Arizona Custom GripsARMI SAN MARCOModel 1873 SINGLE ACTION ARMY STYLE REVOLVERS~ Exclusive ~ MAGNA-TUSK™WHITE STAG GRIPSSimulated Stag Grips milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full instructions with illustrations are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000 What these will fit:This auction is for a set of Genuine Magna-Tusk ™ Aged Simulated Stag grips for the ARMI SAN MARCO Model 1873 Single Action Army SAA revolvers. What these will NOT fit: Please note that these grips are made to fit only the ARMI SAN MARCO revolvers, with the typical “plowhandle” shaped gripframe. The grips are around 3-1/16" to 3-1/8” tall, depending on how you hold your tape, ruler, or caliper. They will NOT fit anything with a Bisley, Birdshead, Thunderer or Lightning style gripframe, which use a completely different shaped gripframe from the ones shown in the photos. Additionally, they will NOT fit other makes and models of revolvers. If you have a different make of revolver, please contact us and let us know what you have, as we have grips available for many other makes and models and will be happy to direct you to the correct listing.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting.10312000A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made numerous makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, as well as the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 10312000 Arizona Custom Grips About Magna-Tusk™ Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material. Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 08292000 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us

Price: 94.95 USD

Location: Mesa, Arizona

End Time: 2024-08-19T23:17:48.000Z

Shipping Cost: 5.99 USD

Product Images

ARMI SAN MARCO SAA GRIPS ~ MAGNA-TUSK™ WHITE STAG

Item Specifics

All returns accepted: ReturnsNotAccepted

For Gun Make: Armi San Marco SAA Revolvers

Material/Finish: Magna-Tusk White Stag

MPN: Does Not Apply

For Gun Type: Armi San Marco SAA Revolvers

Brand: Arizona Custom Grips

Available Variations

Color: Silver Liberty Eagle

Price: 104.95 USD

Available Quantity: 0

Quantity Sold: 0

Color: Gold Liberty Eagle

Price: 104.95 USD

Available Quantity: 0

Quantity Sold: 0

Color: Antique Nickel Steer Skull

Price: 104.95 USD

Available Quantity: 0

Quantity Sold: 0

Color: Red Steer Skull

Price: 104.95 USD

Available Quantity: 0

Quantity Sold: 0

Color: No Medallion

Price: 94.95 USD

Available Quantity: 88

Quantity Sold: 0

Color: Silver Colt

Price: 119.95 USD

Available Quantity: 100

Quantity Sold: 0

Color: Gold Colt

Price: 119.95 USD

Available Quantity: 100

Quantity Sold: 0

Recommended

COLT PYTHON MAGNA-TUSK™ GRIPS – AGED DISTRESSED IVORY
COLT PYTHON MAGNA-TUSK™ GRIPS – AGED DISTRESSED IVORY

$94.95

View Details
RUGER BLACKHAWK, VAQUERO, SINGLE SIX, WRANGLER ~ Magna-Tusk™ WHITE STAG GRIPS QR
RUGER BLACKHAWK, VAQUERO, SINGLE SIX, WRANGLER ~ Magna-Tusk™ WHITE STAG GRIPS QR

$94.95

View Details
UBERTI SAA MAGNA-TUSK™ SINGLE ACTION ARMY ~ 2P AGED STAG GRIPS ~ Cattleman, etc.
UBERTI SAA MAGNA-TUSK™ SINGLE ACTION ARMY ~ 2P AGED STAG GRIPS ~ Cattleman, etc.

$94.95

View Details
COLT PYTHON MAGNA-TUSK™ GRIPS – WHITE IVORY
COLT PYTHON MAGNA-TUSK™ GRIPS – WHITE IVORY

$79.95

View Details
UBERTI 1858 REMINGTON GRIPS ~ MAGNA-TUSK™ AGED DISTRESSED IVORY
UBERTI 1858 REMINGTON GRIPS ~ MAGNA-TUSK™ AGED DISTRESSED IVORY

$94.95

View Details
Arizona Custom Stag™ Ruger Bisley B-Western Grips ~ Bisley Blackhawk, Vaquero NV
Arizona Custom Stag™ Ruger Bisley B-Western Grips ~ Bisley Blackhawk, Vaquero NV

$139.95

View Details
UBERTI / CIMARRON THUNDERER SAA MAGNA-TUSK™ AGED STAG GRIPS (alsoThunderstorm )
UBERTI / CIMARRON THUNDERER SAA MAGNA-TUSK™ AGED STAG GRIPS (alsoThunderstorm )

$94.95

View Details
RUGER BLACKHAWK, SINGLE SIX, WRANGLER, VAQUERO GRIPS ~ Az Custom Stag™ B-Western
RUGER BLACKHAWK, SINGLE SIX, WRANGLER, VAQUERO GRIPS ~ Az Custom Stag™ B-Western

$139.95

View Details
UBERTI SAA AGED DISTRESSED IVORY CLASSIC GRIPS ~ Cattleman, Evil Roy, Hombre
UBERTI SAA AGED DISTRESSED IVORY CLASSIC GRIPS ~ Cattleman, Evil Roy, Hombre

$94.95

View Details
UBERTI / CIMARRON THUNDERER or THUNDERSTORM MAGNA-TUSK ONE-PIECE IVORY GRIPS
UBERTI / CIMARRON THUNDERER or THUNDERSTORM MAGNA-TUSK ONE-PIECE IVORY GRIPS

$84.95

View Details