Description: AH Plus Material is a two-component based on epoxy-amine resin. The AH Plus shows extremely low shrinkage making it a suitable choice of material. It is a good Material choice for use with Pro Taper Thermafil obturators as the setting reaction is not adversely affected by thermoplastic obturation. INDICATIONS:AH Plus can be used in conjugation with obturating material. ADVANTAGES:This material can be used with hot or cold obturation technique.Self-adhesive propertiesDimensional stabilityExcellent biocompatibleExhibits moderate antimicrobial propertiesExtremely radio-opaque so it is clearly visible on radiographs FEATURE:Radio opacity· Depending on the condensation technique used, thicker layers (master point technique) down to very thin layers (lateral condensation technique) can be achieved. In order to ensure adequate visibility of the material even in these thin layers, the radio-opacity has further been increased in AH Plus. Shrinkage, Solubility, and Expansion· The main objective of this AH Plus is to achieve a high degree of tightness. The quality of this material directly depends on the shrinkage upon setting and the solubility of the material used. Film Thickness· AH Plus has a film thickness of 26µm, which is clearly below the value of less than 50µm required by the ISO standard. Flow Behavior· The flow behavior of dental material is one of the most important handling properties. Firstly, favorable flow behavior results in easy mixing. Secondly, the material must be able to be introduced easily and exhibit a certain stability there. Therefore, AH Plus has been designed to be slightly thixotropic. A flow of 36 mm also perfectly meets the requirements of the ISO standard (> 25 mm). Adhesion to dentinIt gets easily adhered to the dentine. PACKAGING:· 1 x 4ml Paste A· 1 x 4ml Paste B Disclaimer"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Price: 80.5 USD
Location: Jamaica, New York
End Time: 2024-09-19T06:19:15.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: DENTSPLY
Expiration Date: min 12 months
MPN: does not apply
Intended Use/Discipline: Dental Laboratory, Dentistry, Endodontics
