Aeotec Z-Wave Plus v2 Door / Window Sensor 7 Pro, Gen7 (ZWA012)

Description: Monitor the open/closed status of a door, window, cabinet, safe, or any other open/close object with the Aeotec Z-Wave Door/Window Sensor 7. This miniscule door/window sensor discreetly monitors your chosen entryways or important storage with its simple design and reduced size. With Z-Wave Plus certification and S2 encryption, the sensor is one of the fastest performing and most secure sensors in the market.3-in-1 Sensor: Open/Close contact, tilt, and tamper sensors within 1 deviceReports Open/Close status of monitored objects and changes in object statusCapable of activating automation or security scenes, start surveillance recordings, and send mobile alerts upon being triggeredCan be converted to any type of sensor utilizing NO (Normally Open) dry contact sensors and external connectionsUltra-small profile at only 3 inches long"Z-Wave Plus" certified for wide compatibilityReceives over-the-air firmware updatesSpatial Intrusion Algorithm provides enhanced predictive security and automation The Door/Window Sensor 7 Pro consists of two parts: the main sensor and a magnet. The main sensor can be mounted onto either the door/window or onto the frame. Two magnets are included with the Door/Window Sensor 7 Pro: a standard magnet cover by plastic that mounts beside the sensor on either the door/window or frame, and a slim "naked" magnet that mounts behind the sensor when the sensor is placed on the side of a door/window. The sensor mounts with the included screws or double-sided tape. Each magnet mounts with double-sided tape. When the two components are separated, the sensor sends signals to up to 7 Z-Wave devices to alert of the change in status or to trigger security or automation events. Alternatively, the sensor also includes a tilt detection function that allows it to report how a window is opened. The window must be tilted at an angle of at least 5 degrees in order for the sensor to detect it.Z-Wave Plus Certification Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.ContentsZ-Wave Door/Window Sensor 7 ProCoverBig MagnetSmall MagnetDouble-Sided Tape Large (x2)Double-Sided Tape Small (x2)Screws (x4)Dowels (x4)NotesRequires a Z-Wave network controller, sold separately.Wireless firmware updates are available via Z-Wave controllers.For indoor use only.Should not be mounted on a metal frame.Technical DetailsManufacturer Part #: ZWA012UPC: 810667025311Protocol: Z-Wave PlusFrequency: 908.4 MHz (U.S)Color: WhiteMaterial: ABS plasticOperating Distance: Up to 164 feet/50 meters outdoorsS2 Security: YesSmart Start: YesRepeater: NoBeaming: NoPower Supply: NoBattery Charger Input: NoBattery Type: 1 * 1/2 AA ER14250 3.6V ratedBattery Life: 3 years assuming 5 open and 5 close events per day with Wakeup reports disabledTilt Detection: must be over 5 degreesOperating distance: Up to 50 meters outdoors, Up to 164 feet outdoorsOperating humidity: 10 to 95%Operating temperature: -20°C to 45°C (-4°F to 113°F)Storage temperature: -30°C to 70°C (-20°F to 158°F)Water proofing: IP20 ratingDimension of Sensor: 0.75 in H x 2.8 in W x 0.7 inches D (19mm x 71mm x 18mm)Dimension of Magnet: 0.13 in H x 0.78 in W x 0.43 inches D (8mm x 20mm x 11mm)Warranty: 1-Year Limited

Price: 46.99 USD

Location: San Diego, California

End Time: 2024-10-31T18:28:07.000Z

Shipping Cost: N/A USD