80A PWM Solar Controller -48V Regulator USBOutput B8K7

Description: The controller uses numerical control technology design, LCD display, automatic operation. Its pulse-width modulation (PWM) type mode, as well as control technology, will greatly extend the . This controller is suitable for the solar energy system (independent system), control the and discharging process automatically. The and discharging process of the controller is optimized, which can prolong the and improve the system performance. Its self-test function and electronic function can controller damage due to installation errors and system failures. Features: Integrated Presets: Integrated presets combined with adaptive logic are well suited for most common types, such as LiFeP04, and flooded -acid. Flexible Application: Automatic identification of /24V/36V/48V system voltage. Multi-stage Algorithm: The multi-stage algorithm is specifically engineered to optimise each recharge cycle and maintenance over extended periods. Adaptive Boost : Adaptive boost monitors the s response during initial and intelligently determines the appropriate boost duration for each individual cycle. This ensures that the is fully recharged regardless of the discharge level or capacity and avoids excessive at the elevated boost voltage (that can accelerate aging). Against Overheating: When the equipment exceeds 85°C, the control automatically stops . Resume when the equipment is 75 °C. Safety Assurance: Output short circuit , discharging , against reverse polarity connection. Silent Operation: Totally silent operation since there is no cooling fan or moving parts, cooling is via natural convection. Compatible: Compatible with Li-ion (LiFePO.) ; when the type parameter is set to the cycle settings are altered to suit. Warning: Do not Li-ion if the is below 0°C. Compatible with -ion and -acid , support user-defined . Automatic identification of /24V/36V/48V system voltage. A variety of functions to ensure the normal operation of the device and extend the . Natural cooling heat dissipation, to achieve totally silent operation. The 2.4-inch LCD screen enables real- and parameter configuration. Small size, weight, easy and quick installation. Built-in 2 USB ports with output of 5V and 2A. User friendly setup, and easy commissioning via front panel LCD. Specifications: Model: Pstar-80A Pstar-80A Rated Current: 80A Rated Output Current: 50A . Input for 12V System: ≤960W . Input for 24V System: ≤1920W . Input for 36V System: ≤2880W . Input for 48V System: ≤3840W Item Size: 187 * 132 * 60mm / 7.36 * 5.20 * 2.36in PV INPUT: . Open Voltage of PV Module: PV Operation Voltage : >System voltage and ≤ MODE: Technology: PWM Algorithm: 3-stages Sel-consumption: ≤20mA Nominal System Voltage: /24V/36V/48V (Auto detection) USB Interface: 5V/2A*2 Material: Metal Class: IP30 Operating Environment: -20~55℃, ≤90%(non-condensing) Item Weight: 607g / 21.42oz Package Weight: 714g / 25.19oz Package Size: 21 * 14.5 * 7.5cm / 8.27 * 5.71 * 2.95in Package List: E23781-80 1 * Controller 1 * Manual (English)

Price: 78.75 USD

Location: Inglewood, California

End Time: 2025-01-11T03:44:23.000Z

Shipping Cost: 0 USD