7-In-1 Air Quality Monitor Indoor, CO2 Detector, Air Quality Tester for Home, VO

Description: 【Comprehensive Air Quality Monitoring】GLOAMFIORD air quality monitor covers 7 important parameters of air quality: Carbon Dioxide (C02), Particulate Matter 2.5 (PM2.5), Particulate Matter 10(PM10), Formaldehyde (HCHO), Volatile Organic Compounds(VOC), Temperature and Humidity, giving you and your family a warm guard【Battery and Electrochemical Sensor】GLOAMFIORD air quality tester can run for 10 hours with a 2-hour charge. Due to the principle of electrochemical sensors, when you fully charge your device, it will run out of power after 1 day, even if the device is asleep, in order to improve the continuity of air quality detection and the accuracy, we recommend that you keep it powered on or charge it every day. Thank you for your understanding and support of our product, hopefully, it will help you and your family create a healthy air environment if you encounter any problems during use. Please do not hesitate to contact us immediately, we will reply you within 24 hours.【Suitable for Most Scenarios】You can place it in your living room, bedroom, basement, greenhouse, toolshed, garage, Or take it when travelling, place it in your hotel room or camping tent, in addition, cars, offices, classrooms, restaurant, hospitals, factories are also appropriate scenarios.【Intelligent Alarm】Once a certain air value exceeds the safety line, it will sound an alarm to protect your and your family's health and safety. At the same time, this air quality tester classifies C02 and PM2.5 values into three levels, light blue for good, yellow for normal, and red for bad.【Accurate and Calibratable】The PM2.5 accuracy is ±15μg/m³, temperature and humidity accuracies are ±O.54℉ and ±3%RH. Please press the setup button for 2 seconds to start calibrating this detector. When you receive the product, please power it on and leave it on for a period of time (preferably more than 12 hours). Product Description Please read the instructions carefully after receiving the product. Due to the principle of electrochemical sensors, when you fully charge your device, it will run out of power after 1-2 days, even if the device is asleep, In order to improve the continuity of air quality detection and the accuracy, so we highly recommend that you keep it powered on or charge it every day. When you receive the product, please power it on and leave it on for a period of time (preferably more than 12 hours). GLOAMFIORD is committed to giving our customers the best quality service, if you have any questions or suggestions during the use of the product, please tell us, our staff will reply you within 24 hours, thank you for choosing our products.

Price: 39.47 USD

Location: Mahwah, New Jersey

End Time: 2024-11-07T14:48:39.000Z

Shipping Cost: 0 USD