Description: Welcome to StopByUs SEARCH eBay STORE CUSTOM EXACT FIT BOAT COVER- Made-to-Order for a specific boat model and year specified in the item title.6.25oz ACRYLIC COATED, MARINE GRADE POLYESTER MATERIAL Made-to-order specifically for make, model, year to standard manufacturer models with no optional, aftermarket, add on equipment unless stated in our listing description. If you have Portable Trolling Motor, Tower, Extended Swim platform, T-Top, Pulpit or any other optional accessory that may intervene with fit of the cover, please contact us or send a message prior to purchase. To select a color, please send us an ebay message right after the purchase and we will add your color preference to your order. Available colors: OCEAN BLUE HUNTER GREEN BURGUNDY BLACK GRAY TEAL CRANBERRY Description Protect your boat with custom boat cover.Whether storing your boat on a trailer, at a marina, in a commercial storage facility, or mooring, a boat cover is needed to protect your boat. Boat covers protect your boat from harmful UV rays, rain and snow, debris and dust, and are a theft deterrent. Our boat covers will protect the exterior and interior of your boat from weather conditions and will also reduce moisture and sun damage. Our Boat Covers will protect your boat from these weather conditions and will keep your boat brand new looking for a long time.-Our premium custom boat covers are made specifically for each model listed. They are patterned and tailored for the specific make, model, and year of the boat. Designed for storing, mooring, and trailering. For Mooring additional accessories are recommended such as: Suction cup tie downs or sand bag kit. The best-fitting covers available. When purchasing a custom boat cover, you will need to know the exact Make, Model and Year of your boat. All custom fit covers are aftermarket covers and might be different from original OEM cover. -Custom fit covers have sewn in vinyl reinforcements at stress points. -There is a draw rope in the hem to tie down your cover. (Tie down loops are sewn in every 2'-3' around the bottom of the cover.)-Please Note: Any after-market accessory that has been installed on your boat may influence the way the cover fits. Please check the cover title & description to ensure the custom cover will work for your boat. If you have any questions, please contact us through messages .-Do not select a boat cover unless the description exactly matches the year, make, model and any additional description of your boat .Unless otherwise stated, boat covers will not fit modified boats with aftermarket accessories or boats with t-tops, ski/wakeboard towers, extended swim platforms, radar arches, ski poles. If you have some doubt, please contact us prior to purchase.PACKAGE INCLUDES:1 Brand New, Custom Fit Boat Cover.Roll of Trailering Straps. !!! Please note: Optional Boat cover support pole is highly recommended to prevent water from pooling on top of the cover and can be purchased in our Ebay store. CLICK HERE FEATURES: All Weather indoor and outdoor protection: Our cover is water resistant, breathable and provides a great protection from: sun, dust, dirt, mold, mildew, snow, and other corruptive elements.Made from Technologically Advanced, 6.25 oz 100% Acrylic Coated, Marine-grade polyester. Designed for extra durability and all-weather protection . 6.25 oz, strong and durable. UV and mildew resistant. Extremely water repellant. Breathable to help allow interior moisture to escape. Designed for Mooring, Trailering, as well as storage purposes of your boat.Cover includes a large diameter nylon draw rope in the hem to cinch the cover up tight to the hull. Plus, a patented "Rope Lock" helps to quickly tighten and loose the draw rope for nearly effortless cover changes.Stress Points Reinforcements: This Cover includes sewn-in heavy-duty reinforcements, extending the life of the cover.There are sewn-in tie down loops. Straps included in the package as well. Double-stitched durable 4-ply seams, double folded hems.It will efficiently shield your Boat from all finish-destroying agents: sun, snow, dust, dirt, mold, mildew and other corruptive elements.Dust Protection: Our cover shields your Boat from fine dust. Whether indoors or out, when dust sits on your paint it turns abrasive and causes scratches.Dirt protection: The Boat will stay cleanUV Protection: Harsh UV (ultraviolet) rays and the intense radiant heat of the Sun can damage the paint. Treated with non-hazardous uv coat, our cover is like sunscreen for your boat, blocking harmful UV light.Mold and Mildew Protection: The material is treated to minimize mold and mildew.Moisture and Salt Protection: Cover will keep moisture out.Easy to use: Remove the cover and your boat is as good as new and ready for an adventure.Investing in our quality cover is not only a practical move, but also the perfect option for maintaining of your Boat.5 YEARS Limited, Pro-rated Warranty!!! Please note: Please make sure you select the correct make, model, year of your boat before ordering as there is 35% restocking fee to return or exchange the item. If you can't find the model of your boat listed or have any questions, please contact us and we will gladly help. What do the abbreviations mean in your listings?? BR - Bow Rider or Bow Rails ( for cuddy cabin boat styles)? BR (B/RAILS) - Bow Rails ( for cuddy cabin boat styles)? S/RAILS - Side Rails ? CC (CENTER CONS) - Center Console or Cuddy Cabin Boats? DC - Dual Console? EXTD SWPF - Extended Swim platform? FOOTPRINT - The distance between the tower feet? FS - Fish & Ski? JP -Jack Plate? I/O - Inboard/Outdrive Motor? O/B=OB - Outboard Motor? PPF - Poling Platform? SC (SIDE CONS)- Single Console / Side Console? SF - Ski & Fish or Sport Fish? TM (PTM) - Trolling Motor? TWR - Ski Tower? W/ BR - with Bow Rail? W/ SWPF (S/P) - Covers Swim platform? W/ WS Tower - with Watersports Tower? W/O SWPF - Without Swim platform Coverage? WAC - Walk Around Cuddy? OVER MTR - Covers O/B Motor? LTD ED- Limited Edition? WINDSH - Windshield If you see any additional abbreviations that aren't clear or you have any questions, please FAQ:How do I select a color?Simply send us a message right after the purchase with your color selection. Color choices are described in product description PLEASE READ BELOW TO MAKE SURE THAT YOU WILL BE ORDERING THE CORRECT PRODUCTS:Any after-market accessory that has been installed on your boat, may influence the way the cover fits. Please check Helpful Info section for more details. If you have any aftermarket or optional accessories on the boat, please contact us prior to purchase:Will this cover include my outboard motor?If purchasing a Custom Boat Cover, unless otherwise stated, the motor hood cover needs to be purchased separately. O/B Patterns will go around the motor, but will not cover it. If you are in need of motor cover we do offer motor covers in our store.Make sure that you order the hood from the same fabric as boat cover at the time of ordering to match your boat cover's fabric.Is this an OEM cover, same as original cover supplied by boat manufacturer?This is an aftermarket product. It will not be exactly the same as the original cover. We are not associated with any boat manufacturers and only carry superior quality aftermarket products.Does the boat cover have snaps?No. Our covers have shock cords sewn into the hem for a snug fit and loops or buckles sewn into the cover for the tie-down straps.None of the aftermarket boat covers have snaps. The original snap on cover that snap to the boat are only available from the manufacturer ? and usually are not available after the boat design is out of production.Are the covers designed for mooring, trailering and storage purposes and how are they attaching to the boat? Our covers can be used for storage, mooring, or trailering!Custom Fit covers have draw rope in the hem to tie down your cover. Tie down loops sewn into its hem one every 2-3'.It is recommended that you don't cover the swim step of your boat when mooring, unless you have an integrated swim platform on the boat.For mooring, we offer optional suction cup tie downs or sand bags kits. Please visit our store.CLICK HEREFor storage on a trailer or trailering, loops sewn to the sides of the cover can be utilized with straps. The straps will go down and wrap around the trailer legs. Tie Downs are included with every boat cover. For boats over 22? in length some extra straps might be needed. Additional straps can be purchased in our store. Tie downs are mandatory for use with our travel covers. Even if you do not plan to travel with your boat cover, the tie downs can provide a convenient way to secure your boat cover.Are your covers waterproof?All of our boat covers are highly water resistant, but not 100% waterproof. 100% waterproof covers trap moisture caused by condensation. It need to evaporate to prevent mold and mildew problems. Simply make sure to use a boat cover support pole or similar device to raise the cover up to create an angle for water to escape and water will not seep through and will roll off to the sides. The cover has to be breathable to let moisture to evaporate in order to prevent mold and mildew problems. 100% waterproof covers are not breathable and are not advisable. Even the most expensive material on the market, Sunbrella, is not waterproof. What do you mean by saying that a cover is "breathable"?- This means that all condensation will evaporate and it will prevent mold and mildew issues. This is especially important if you live in a humid areas.You don't list my boat. How can I get help?Simply and we will gladly assist and will provide with Ebay item number to purchase.Send us a message through Ebay messages and we will reply with available options. Please specify year, make and exact model of your boat. Picture of the boat will be helpful as well. Messages are read and responded to every business day (M-F)I AM NOT SURE ABOUT THE MODEL OF MY BOAT. HOW CAN I FIND OUT THE MODEL OF IT? Please take a look at the boat registration. There will be a HULL ID listed. You can also find Hull ID number on a top right corner of your boat stern. Please call the manufacturer of your boat and they can tell you the exact model of your boat by checking HULL ID.If my boat cover doesn't fit, can I return it?All covers are made at the time of order (MADE TO ORDER) and come with restocking fees. All custom fit covers come with 35% restocking fee.How long will it take to receive my product?All custom fit covers are made to order. Production takes 7-10 business days (lead times may increase during peak season) to manufacture, and then your cover will ship to your door via UPS.Will I be responsible for International customs and duties fees if the package is shipped internationally?International Customers: All customs duties including: taxes, fees, and all extra charges are the customer's responsibility and will be collected by the carrier upon delivery. Please consult your local customs office before placing a purchase for rates. Helpful Info: How do I select a color? Simply send us a message right after the purchase with your color selection. Color choices are described in product description Do I have a choice of materials? This cover is made from 6.25 oz Woven Polyester material, other fabrics are available, please contact us for details. Custom Covers: Our premium custom boat covers are made specifically for each model listed. They are patterned and tailored for the specific make, model, and year of the boat. Designed for storing, mooring, and trailering. For Mooring additional accessories are recommended such as: Suction cup tie downs or sand bag kit.The best-fitting covers available. When purchasing a custom boat cover, you will need to know the exact Make, Model and Year of your boat. All custom fit covers are aftermarket covers and might be different from original OEM cover. Custom fit covers have sewn in vinyl reinforcements at stress points. Custom fit covers have draw rope in the hem to tie down your cover. (Tie down loops are sewn in every 2-3' around the bottom of the cover.) Please Note: Any after-market accessory that has been installed on your boat may influence the way the cover fits. Please check the cover title & description to ensure the custom cover will work for your boat. If you have any questions, please contact us through messages . Do not select a boat cover unless the description exactly matches the year, make, model and any additional description of your boat .Unless otherwise stated, boat covers will not fit modified boats with aftermarket accessories or boats with t-tops, ski/wakeboard towers, extended swim platforms, radar arches, ski poles. If you have some doubt, please contact us prior to purchase. PLEASE READ BELOW TO MAKE SURE THAT YOU WILL BE ORDERING THE CORRECT PRODUCTS: Any after-market accessory that has been installed on your boat, may influence the way the cover fits. Below are the most common add-ons. If you have any aftermarket or optional accessories on the boat, please contact us prior to purchase: Wakeboard Towers: If you boat is equipped with Wakeboard or Ski Tower, please contact us prior to purchase. Please specify if you have an Original or Aftermarket tower. The picture of the tower will be needed to determine which cover will fit better. T-Tops If you Boat is equipped with T-Top, regular boat covers will not accommodate it. Pease contact us prior to purchase. You will need to purchase a special cover to accommodate boat with T-Top. Please take a look at T-Top Boat covers section in our store or simply contact us for details. Boats with Bimini Tops Our boat covers will go over most bimini tops that can collapse and lay flat against the boat. We do not offer covers with cutouts for non-collapsible bimini tops. Bow Rails: Some Boats might come with non-standard Bow Rails. If your Boat has bow rails higher than 12? in height, please contact us prior to purchase. Bow Pulpit/Anchor If your boat is equipped with factory or aftermarket bow pulpits and/or anchor davits, please contact us prior to purchase. WE will need to know the total length of your boat including pulpit to ensure that the cover will accommodate it. To find the best fit, add the length of the bow pulpit or anchor davit to the centerline length when selecting the boat length. For Example: If a boat has a centerline length of 24 feet. A bow pulpit that measures 2 feet in length is installed on the boat. For the cover to fit properly, the correct centerline length for the boat would now be 26 feet. Extended Swim Platform There are 2 types of swim platforms: Extended and Integrated. Extended swim platforms are an addition to the boat and usually extend centerline length of the boat by approximately 2?. They are usually removable. To find the best fit, add the length of the swim platform to the centerline length when selecting the boat length. Please keep in mind that swim platforms aren?t always standard on a boat. Our covers may not fit boats with teak swim platforms. Please contact us prior to purchase. Integrated swim platforms are a part of the boat and can not be removed (if needed) and are usually accounted into the overall length of the boat For Example: A boat has a centerline length of 20 feet. An extended swim platform that measures 2 feet in length is installed on the boat. For the cover to fit properly, the correct centerline length for the boat would now be 22 feet. If the boat in example below has integrated swim platform. The centerline of the boat should still be 20 feet. Please check the title of the item. If the cover is designed to accommodate a swim platform, it will be mentioned in the title. Please contact us prior to purchase to ensure that the cover will accommodate it. Jack Plate If the cover is designed to accommodate Jack Plate, it will be mentioned in the title. Please contact us prior to purchase to ensure that the cover will accommodate it. We will need to know the centerline length of the boat including jack plate. To find the best fit, add the length of the jack plate to the centerline length when selecting the boat length. For Example: A boat has a centerline length of 20 feet. A jack plate that measures 6 inches in length is installed on the boat. For the cover to fit properly, the correct centerline length for the boat would now be 20 feet 6 inches. Kicker Motor (Secondary Motor) Please note: Our boat covers are not made to cover kicker motors. However, the cover most likely fit over the kicker motor. If not, you will need to remove the kicker motor while using the cover. PTM- Electric Trolling Motor If the cover is designed to accommodate Trolling Motor, it will be mentioned in the title. Please contact us prior to purchase to ensure that the cover will accommodate it. Most of our boat covers will accommodate electric trolling motors as long as the motor is in the stored position with the shaft running parallel to the transom. For styled to fit and flex fit cover, you will need to cover sharp blades of the motor with blanket or towel before applying the cover, or reinforcement kit can be purchased in our store. Non-Standard Equipment Some boat manufacturers offer non-standard equipment such as extra tall center consoles, Ski poles, extra high bow rails, extra tall windscreens.etc. Please contact us prior to purchase to check if the cover will still fit Will this cover include my outboard motor? If purchasing a Custom Boat Cover, unless otherwise stated, the motor hood cover needs to be purchased separately. O/B Patterns will go around the motor, but will not cover it. If you are in need of motor cover we do offer motor covers in our store. Make sure that you order the hood from the same fabric as boat cover at the time of ordering to match your boat cover's fabric. Outboard (O/B) vs. Sterndrive (I/O) vs. Inboard (I/B) Outboard (O/B) - Removable engine mounted to the transom of the boat. Sterndrive or Inboard/Outdrive (I/O) - Permanent engine mounted on stern of the boat with portion of engine in the water. Inboard (I/B) - Permanent engine mounted in the center / stern of boat with only the propeller shaft exposed to water. Choose the right cover for your engine! The cover for an outboard motor (O/B) will typically not fit a boat with (I/O) engine. The sterndrive cover should be used for both sterndrive (I/O) boats and (I/B) boats. Is this an OEM cover, same as original cover supplied by boat manufacturer? This is an aftermarket product. It will not be exactly the same as the original cover. We are not associated with any boat manufacturers and only carry superior quality aftermarket products. Does the boat cover have snaps? No. Our covers have shock cords sewn into the hem for a snug fit and loops or buckles sewn into the cover for the tie-down straps. None of the aftermarket boat covers have snaps. The original snap on cover that snap to the boat are only available from the manufacturer ? and usually are not available after the boat design is out of production. Are the covers designed for mooring, trailering and storage purposes and how are they attaching to the boat? Our covers can be used for storage, mooring, or trailering! Custom Fit covers have draw rope in the hem to tie down your cover. Tie down loops sewn into its hem one every 2-3'. It is recommended that you don't cover the swim step of your boat when mooring, unless you have an integrated swim platform on the boat. For mooring, we offer optional suction cup tie downs or sand bags kits. Please visit our store. For storage on a trailer or trailering, loops sewn to the sides of the cover can be utilized with straps. The straps will go down and wrap around the trailer legs. Tie Downs are included with every boat cover. For boats over 22? in length some extra straps might be needed. Additional straps can be purchased in our store. Tie downs are mandatory for use with our travel covers. Even if you do not plan to travel with your boat cover, the tie downs can provide a convenient way to secure your boat cover. Why do I need a support pole? A tie down kit? A support pole is needed to prevent water and/or snow from pooling on your cover. Does the cover have openings for support poles? No. If you have support poles already, we suggest cutting a tennis ball or foam pool noodle and placing it over the tip that will be touching the cover. All Custom fit covers will have a snap installed for a support pole if you will be using a support pole with snap attachment on top. Are your covers waterproof? All of our boat covers are highly water resistant, but not 100% waterproof. 100% waterproof covers trap moisture caused by condensation. It need to evaporate to prevent mold and mildew problems. Simply make sure to use a boat cover support pole or similar device to raise the cover up to create an angle for water to escape and water will not seep through and will roll off to the sides. The cover has to be breathable to let moisture to evaporate in order to prevent mold and mildew problems. 100% waterproof covers are not breathable and are not advisable. Even the most expensive material on the market, Sunbrella, is not waterproof. What do you mean by saying that a cover is "breathable"?- This means that all condensation will evaporate and it will prevent mold and mildew issues. This is especially important if you live in a humid areas. How to measure my boat? Measure your boat's centerline length (straight measurement from bow to stern) To measure the centerline length, stand inside the boat and run a measuring tape from ?tip to tip? (from front to back) through the center of the boat. NOTE: Do not measure up and over the windshield, this is a straight line measurement. Add the length of any installed accessories that should be covered by the boat cover (such as pulpits, jack plates, extended swim platforms) to the centerline length. Measure your boat's beam (widest point, usually mid-ship). To measure the beam, stand inside the boat and run a measuring tape from the port (left) side to the starboard (right) side at the widest section of your boat You don't list my boat. How can I get help? Simply and we will gladly assist and will provide with Ebay item number to purchase. Send us a message through Ebay messages and we will reply with available options. Please specify year, make and exact model of your boat. Picture of the boat will be helpful as well. Messages are read and responded to every business day (M-F) I AM NOT SURE ABOUT THE MODEL OF MY BOAT. HOW CAN I FIND OUT THE MODEL OF IT? Please take a look at the boat registration. There will be a HULL ID listed. You can also find Hull ID number on a top right corner of your boat stern. Please call the manufacturer of your boat and they can tell you the exact model of your boat by checking HULL ID. If my boat cover doesn't fit, can I return it? All covers are made at the time of order (MADE TO ORDER) and come with restocking fees. All custom fit covers come with 35% restocking fee. How long will it take to receive my product? All custom fit covers are made to order. Production takes 7-10 business days (lead times may increase during peak season) to manufacture, and then your cover will ship to your door via UPS. I live outside of the continental USA. How do I order if your checkout page doesn?t give me the option? For customers who live in Canada, Puerto Rico, Alaska, Hawaii, or anywhere else, you must contact customer service by phone or Ebay message prior to your order, we will advise you on shipping costs to your Country. If you are international customer, simply send us a message through Ebay ask seller a question link. We will advise you in International shipping costs. Will I be responsible for International customs and duties fees if the package is shipped internationally? International Customers: All customs duties including: taxes, fees, and all extra charges are the customer's responsibility and will be collected by the carrier upon delivery. Please consult your local customs office before placing a purchase for rates. How long will it take to receive my product? All custom fit covers are made to order. Production takes 7-10 business days (lead times may increase during peak season) to manufacture, and then your cover will ship to your door via UPS GROUND.Please note, we can not ship packages to PO Box address. I live outside of the continental USA. How do I order if your checkout page doesn?t give me the option? For customers who live in Canada, Puerto Rico, Alaska, Hawaii, or anywhere else, you must contact customer service by phone or Ebay message prior to your order, we will advise you on shipping costs to your Country. If you are international customer, simply send us a message through Ebay ask seller a question link. We will advise you in International shipping costs. Will I be responsible for International customs and duties fees if the package is shipped internationally? International Customers: All customs duties including: taxes, fees, and all extra charges are the customer's responsibility and will be collected by the carrier upon delivery. Please consult your local customs office before placing a purchase for rates. RETURNS: The materials and workmanship in ALL our products are guaranteed to be free of defects at the time of manufacture. This Item is MADE TO ORDER in the United States. All our Patterns listed are confirmed for a specific production year, make, and a model of the boat mentioned in the listing title. Please make sure you select the correct Year, Make, and a Model of your boat before ordering, as custom fit covers are not returnable. If an item that you have received does NOT fit your Boat or is NOT "Item as Described", supporting pictures of NOT fitting item as well as Hull ID number of the boat will be required. You can contact us with any questions. Ebay messages are the Best way to Communicate. All request will be filled within 24 business hours. Happy Sailing!!! Sincerely, StopByUs HOW TO INSTALL MY NEW COVER AND HOW TO CARE FOR IT ?: click here HELPFUL INFORMATION ON SELECTING BOAT COVER: click here Matching Products Boat Cover Support Pole System with straps Stops Water Pooling Boat Cover Support Pole Adjusts from 12" to 54" H Mooring: Set of 4 Giant Suction cups for Boat Cover Mooring: Set of 4 Sandbags for Boat Cover #2d2c2a
Price: 697.41 USD
Location: Gloversville, New York
End Time: 2025-01-13T20:05:20.000Z
Shipping Cost: 24.99 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Manufacturer Part Number: TL-SBU1
Brand: TL-SBU
