60V 1200W Switching Mode Power Supply Adapter SMPS AC 110/220V to DC 60V

Description: This is an open box item, however this item is new and has not been used. From Exenwing: 60V 1200W Switching Mode Power Supply Adapter SMPS AC 110/220V to DC 60V Universal Regulated Transformer Converter PSU Max 20A for 60Volt Industrial Automation Control,Servo Motor,etc 【AC TO DC CONVERTER 60V POWER SUPPLY】-Input: AC 110/220V 50 / 60Hz; Output: Default DC 60V,Adjustable range: ±10%,form 54V-66V, which greatly expand its application range. Maximum 20A 1200watt power.Please select a power supply at least 20% larger than your device's rated power,good for safety.Three sets of output channels available,it can power more devices. Net weight: 2.42 lbs. Dimension: 24.5*12.5*6.5cm/9.64 X 4.92 X 2.56 inch【Good Heat Dissipation】-This AC to DC universal power supply transformer 110V to 60V is made of metal material with many holes,which makes heat dissipation more effictive and ensures stability.Built-in cooling fan to prevent the device from overheating,when the working temperature is more than 122℉(45℃), the intelligent thermal protection will active the cooling fan with little noise to lower the temperature. 🔺Non-waterproof, In-Door Use Only!【Switchable Dual Input Voltage Converter】-There is a voltage switch located on the side of the convetert,our factory setting for US customers is 110V.If you want to use AC 220V,please don't forget to adjust the switch to the 230V(220V) side before use to avoid damaging.AC 110V/220V is just according to your local voltage.【SAFETY PERFORMANCE】-100% full load burn-in tested,guaranteed security. With smart chips provide automatic overload cut-off / over Voltage cut-off / automatic thermal cut-off / short circuit protection.protect your electronic products from destruction.There is no voltage fluctuations at power on, during transmit, receive, or at power off.Built-in EMI filter, low output ripple.【HOW TO CHOOSE？】The peak power of this item is 20A 1200watts, suitable for most common 60V devices, such as Industrial Automation Control,Servo Motor,etc. It will automatically outputs 0~20A current to match your device, the actual current is depended on the load,such as 5A(300W), 10A(600W), 15A(900W)....Make sure your device match the 60V voltage and current less than 100Amper.Please DON'T run it overload,Don't use it as charger,it is just a voltage converter.

Price: 65.99 USD

Location: Sterling Heights, Michigan

End Time: 2025-01-09T23:35:25.000Z

Shipping Cost: N/A USD