60cm Tile Cutter Manual Tile Cutter Ceramic Porcelain Cutting Machine w/ Ruler

Description: Specification Product Model: 800F Cutting Wheel Model: YG96 Color: Blue Cutting Wheel Material: Tungsten Alloy Handle&Bearing Material: Aluminium Alloy Base Material: Aluminium Alloy, Sponge Slide Rail Material: Alloy Steel Slide Rail Surface Treatment: Hardening Process, Electroplating Process Operating Method: Manual Guide Rail: Dual Track Special Function: Infrared Positioning Balancing Brackets&Ruler Bar Adjustable Angle Range: 0-90° Battery Type: 2* AAA (Included) Slide Rail Diameter: 20mm/0.78in Base Plate Thickness: 1.2mm/0.04in Maximum Cutting Width: 60cm/23.6in Minimum Cutting Width: 1cm/0.39inch Maximum Cutting Thickness: 15mm (3/5inch) Base Size (L*W): 81*20cm/31*7.87inch Package Included 1* Manual Tile Cutter (With Balancing Brackets+Ruler Bar) 1* English Manual60cm Tile Cutter Manual Tile Cutter Ceramic Porcelain Cutting Machine w/ Ruler60cm Manual Tile Cutter With Tungsten Alloy Wheel, Tile Cutter Tool for Porcelain Ceramic Floor Tile, Infrared Positioning Guided Precision, Adjustable Measurement Ruler Description A manual tile cutter is a commonly used cutting tool in construction. The reinforced tungsten alloy cutting wheel can ensure efficient cutting. Simply apply appropriate pressure on the handle to push the cutting wheel into the tile for cutting. Compared to electric tile machines, manual tile machines are compact and easy to operate, making them suitable for cutting a wide range of tiles. Key FeaturesEfficient&Precise Cutting: The reinforced tungsten alloy cutting wheel with high hardness can ensure smooth and flat cutting without burrs, making the joints more beautiful to save decoration costs with an efficiency of 5-10 times higher than an electric cutting machine. Meanwhile, the embedded collimator with infrared positioning function and the precise guiding ruler with clear scale can facilitate high-precision cutting. Energy-saving&Environmentally Friendly: It is easy and economical to use without having to connect to a power supply or add petrol, saving lots of energy. Thoughtful Design: The high-quality ball bearings allow for smooth rolling cuts. Also, the cutter wheel is highly visible, making it easy to observe the working process. Good Stability: The large and thickened base and screw-reinforced handle ensure good stability, so you can use this product safely. Sturdy and Durable: The tungsten alloy cutting wheel, aluminum alloy handle&bearing&base, and hardened alloy steel slide rail are wear-resistant, corrosion-resistant, and can resist shock, deformation, and break, ensuring extended service life. And the electroplating process makes the slide rails shinier and less prone to rusting. Hassle-free Use: It can achieve dust-free and noise-free cutting, providing you with a comfortable operating environment. Once the tile has been marked, you can easily cut it by gently pressing the handle. And the thickened sponge pad on the base and shockproof U-shaped sheath can protect the tiles from breakage. Meanwhile, you can adjust the ruler through nuts. DetailsErgonomic Handle: The curved ergonomic handle makes it easier to operate with less effort. The aluminum alloy handle has a non-slip rubber cover on the end, which does not hurt your hand and makes it more comfortable to use. Balancing Bracket&Ruler Bar: They can flexibly move within 90° to support the tiles and accurately measure them. ApplicationIt is suitable for cutting materials with a thickness within 3/5'' and width within 0.39-23.6'', such as wall tiles, groove tiles, raised tiles, patterned tiles, flat tiles, solid tiles, glazed tiles, polished tiles, glass tiles, and many other mainstream tiles. It can be used in multiple workshops and industrial sites. How to Use1. Fixed Position: Hold the handle with one hand, pull the slide back to the seat, and place the ceramic tile flat on the base plate (if necessary, extend the ruler to measure). Align the cutting line of the ceramic tile with the center support plate, and the front end of the ceramic tile should be close to the notch of the base plate.2. Score and Press Down: Lower the handle and make the cutting wheel contact with the surface of the ceramic tile. Push the handle forward lightly to cut a continuous, even straight line on the ceramic tile.3. Break-off: Lift the handle slightly backward, allowing the pressure block to fall smoothly onto the front end of the ceramic tile. Apply appropriate force to push the handle down, and the ceramic tile will break along the scoring line. SpecificationProduct Model: 800FCutting Wheel Model: YG96Color: BlueCutting Wheel Material: Tungsten AlloyHandle&Bearing Material: Aluminium AlloyBase Material: Aluminium Alloy, SpongeSlide Rail Material: Alloy SteelSlide Rail Surface Treatment: Hardening Process, Electroplating ProcessOperating Method: ManualGuide Rail: Dual TrackSpecial Function: Infrared PositioningBalancing Brackets&Ruler Bar Adjustable Angle Range: 0-90°Battery Type: 2* AAA (Included)Slide Rail Diameter: 20mm/0.78inBase Plate Thickness: 1.2mm/0.04inMaximum Cutting Width: 60cm/23.6inMinimum Cutting Width: 1cm/0.39inchMaximum Cutting Thickness: 15mm (3/5inch)Gross Weight: 8kg/17lbsPackage Size: 82*25*18cm/32*9*7inchBase Size (L*W): 81*20cm/31*7.87inch Package Included1* Manual Tile Cutter (With Balancing Brackets+Ruler Bar)1* English ManualPaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Oct 10, 2024 at 19:52:17 PDT, seller added the following information:

Price: 74.01 USD

Location: Chino, California

End Time: 2025-01-11T03:06:50.000Z

Shipping Cost: 0 USD