4L80E Mechanical Cable Drive Speedometer Conversion For Your Housing

Description: READ THIS PLEASE: This is not a kit. You send us your 2wd tail housing and we modify it for cable speedometer drive. FYI: I can not send you my contact info before the sale per ebay's rules. Info will be sent after the sale. We also have housings for sale that you don't need to send yours in. Please check our other listings for these. We need your axle ratio and tire size, and if you have an o-ring or full spline output shaft. We do not do exchanges. You get the same housing back that you sent. Your housing must match the one in the pictures. This is the only style we can modify. Our 4L80E conversion keeps your VSS fully functional and adds a cable drive to your tail housing. You send us your tail housing and we modify and send it back with a speedometer gear adapter or a modified speedometer gear that you install on the output shaft. On 4L80E's there are two styles of output shafts. One is a full spline and we supply an adapter you slide onto the shaft and tighten down. Both drive and driven gears matched to your axle ratio and tire size are included. The second style is an O-ring type. On this type you discard the sealing tube and you must use a non-vented driveshaft yoke. Installation instructions are included. Turn around time is 1 week or less once we receive your part. Our commercial customers include Liberty Gears, Tick Performance, The Gearbox.org, Phoenix Transmission, Anaheim Gear, Manual transmission warehouse. This is our 11th year of doing these modifications. If you have any questions please let me know. Thank you for looking at our products.

Price: 350 USD

Location: Silverlake, Washington

End Time: 2024-08-02T01:27:31.000Z

Shipping Cost: 25.41 USD