Description: *3D-Fuel* HydroSupport - Water Soluble Support Material 2.85mm 500g HydroSupport dissolves completely in water and is much easier to print with than PVA filament. Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports off by hand, or 2 - 12 hours to dissolve completely. The process can be sped up further by using warm water and agitation. For example, by using a heated ultrasonic tank. HydroSupport is non-toxic, meaning it can be rinsed down the drain without harming the environment or wildlife. HydroSupport has a high tensile strength and feels like PLA when printing is complete. Use it as a support material to print large overhangs, intricate inner geometry, and deep cavities. Packing Information:500g (1.1lbs) of HydroSupport - Water Soluble Support filament arrives on an easy-to-use plastic reel and is vacuum sealed with a desiccant packet to keep out any moisture.
Price: 21.99 USD
Location: Oakland Gardens, New York
End Time: 2024-11-29T04:06:48.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: 3D-Fuel
Type: Filament
Color: Natural
Filament Diameter: 2.85mm
Compatible Model: For LulzBot Mini, For LulzBot TAZ 5, For LulzBot TAZ 6
Material: Hydro-Support
