2x15mm H&R wheelspacers for ALFA ROMEO 4C 30135584

Description: H&R Wheel Spacers Silver Width: 2 x 15mm PCD: 5x98 Centerbore: 58,1mm H&R wheel spacer system DR Silver H&R Spacers DR 2x15mm 30135584 for ALFA ROMEO 4C H&R TRAK+ Wheel spacers System DR improve the look as well as the handling of your car and are compatible with both stock and aftermarket wheels. Wheel spacers are an ideal complement to lowering springs or coilovers. By installing H&R spacers, the wheels fill the wheel arches properly, which significantly improves the look and the driving behavior. Product benefits: High strength, light weight aluminium/magnesium alloyPrecision CNC machinedHard anodized for greater surface hardness and corrosion resistanceFit either stock or aftermarket wheelsCompatible with OEM and aftermarket suspension systemsEngineered and manufactured in GermanyThe H&R Spacers 2x15mm 30135584 should be fitted between the wheel and the axial hub using longer bolts. Two Spacer (= for one axle) H&R product code: 30135584 Please note additional information and vehicle-specific technical notes! DR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper round loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately. 25.) Not usable with steel-rims! 3.) All DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12/d24 mm for M14/d28 mm Round-head for M12/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1 25 Flat-head for PORSCHE-original-wheels M14x1 5 Safety Guidelines (No. of turns for wheel screws) M12x1 5 = 6 5 turns = approx. 10 mm of load bearing shaft length M12x1 25 = 8 0 turns = approx. 10 mm of load bearing shaft length M12x1 75 = 6 5 turns = approx. 12 mm of load bearing shaft length M14x1 5 = 7 5 turns = approx. 12 mm of load bearing shaft length 1/2"UNF = 8 0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes). Fits for: ManufacturerModelConstruction yearCertificate ALFA ROMEO4C (960_)01.03.2013 --> 01.12.2020TÜV**ALFA ROMEO4C SPIDER (960_)01.10.2014 --> 01.12.2020TÜV** TÜV**: Application based on TUV certificate. ABE**: Application based on general operating license issued by german KBA. FG**: Application based on max load testing report. H&R | Wheel Spacers H&R TRAK+ Wheel Spacers improve the look as well as the handling of your car while being compatible with both the stock and aftermarket wheels. Product Benefits: high strength, light weight aluminium/ magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Available in silver and black (depending on application) Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Includes detailed mounting instructions for quick and easy installation Delivered with TUV or ABE approval Engineered, manufactured and tested in Germany

Price: 182.95 USD

Location: Naila

End Time: 2025-01-19T14:59:32.000Z

Shipping Cost: 0 USD