Description: Complete 9 inch Ford Rear End Kit for 1978 - 1987 GM G body vehicles: Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons CHOOSE: GEAR RATIOREAR END YOKE SIZE ANDBOLT PATTERN FILL AND DRAIN PLUGS (NONE OR 3/4 NPT IF REQUESTED WHEN YOU ORDER) **********( WE CAN NOT BUILD UNTIL THE ABOVE OPTIONS ARE CHOSEN!!!)************ Ford 9 Inch for A Body New Flanged Housing 58" Stock pinion Location with Big Ford New Style Housing Ends. 78-87 GM Midsize Cars.Wheel mounting flange to wheel mounting flange will be 58" with axles installed (2 1/2" offset axles)Stock rear end pinion yoke location between wheel flanges when center section is installed. Standard driveshaft location 1/2" to the passenger side exactly like a General Motors rear.Stamped Housing with new 3" x .188" wall DOM tubing.new studs installed in housing Nodular Iron 31 spline Eaton True Trac Center Section 9" Ford with Premium ring & pinion, Assembled. ALL NEW UNIT.The Center Section will be Assembled and set up by Professionals. Nodular Iron Gear case and Nodular iron Daytona Pinion Support.CHOOSE 9 inch Ford Premium 8620 Street Series Ring & Pinion US Gear is the only aftermarket ring & pinion manufactured in the USA.2.89" OD Bearing size x 1.78" ID bearing surface. nodular iron 5 bolt pinion support. CHOOSE New Rear End Yoke 1310 series (3 7/32" wide with 1 1/16" caps), 1330 series ( 3 5/8" wide with 1 1/8" caps) or 1350 series ( 3 5/8" wide with 1 3/16" caps) rear end yoke .31 spline 9 inch Ford Eaton True Trac Carrier, specifications and description below.EATON Truetrac?The Detroit Truetrac is a helical-gear style performance differential that maximizes wheel traction and enhances driving and handling characteristics.OperationThe Truetrac operates as a standard or open differential under normal driving conditions, allowing one wheel to spin faster or slower as necessary. When a wheel encounters a loss of traction or the terrain changes, the gear separation forces take effect and transfer torque to the high-traction wheel. The helical-shaped gears mesh with increasing force until wheel spin is slowed or completely stopped. When the vehicle exits the low traction situation, the differential resumes normal operation.PerformanceOperation of the Truetrac is smooth, quiet and automatic. The unit will engage without any driver knowledge or action required. It also has no wearable parts and requires no maintenance, meaning less time in the garage and more on the road. The Eaton Detroit Truetrac is a very versatile differential that can enhance traction in a variety of vehicles. Units are currently available for front- and rear-axle applications. Below is a list of common uses:Daily street-driving cars, trucks and SUVsTow vehiclesOff-road or trail rigsHigh-horsepower racing vehiclesRVs/Motor HomesUtility VehiclesLandscape TrucksWalk-in VansPackage includes: PEM nodular iron case, iron Daytona pinion support, pinion bearings & races, pinion bolts, pinion depth shims, pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.All bearings and seals are Premium Brands ( either Timken or Koyo).Also comes with big housing gasket and u-bolts for yoke. PEM 9" Ford 11" Drum Brake Kit ALL NEW KIT11" drum Brake Kit for 9" Ford Rear End.Choose bolt pattern you want, the drums come with 5 x 5.5" bolt pattern NOTE: If you are wanting a 5x4.5 , 5x4.75 or 5x5 bolt pattern added you must tell us upon checkout in the "Note to Seller" or you will just receive the standard 5x5.5 pattern all with 1/2" holesI.D. Brake Drum x 2.75" machined surface inside.Drum O.D. is 12.625" at the biggest part.Drum has 2.78" Hub Register.Brake shoes are 2.25" wide.The backing plates fit Big Bearing 3.15" OD Bearing for the New Style Big Ford with 3/8" bolts (as shown in pictures)For 2.5" axle offset. WARNING: CancerAnd Reproductive Harm-www.P65Warnings.ca.govTHIS WILL BE SHIPPED BY TRUCK FREIGHT TO A COMMERCIAL ADDRESS. MUST HAVE A LOADING DOCK OR A FORK LIFT.
Price: 2891 USD
Location: Saint Clair, Missouri
End Time: 2025-01-29T17:01:45.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Modified Item: No
Custom Bundle: No
Manufacturer Part Number: STFHNM290290-TT-DRUM
Brand: PEM
Non-Domestic Product: No
