16FT Battery Charger Extension Cable Adapter SAE Connectors Quick

Description: [Use In 12 Volt DC Systems Only]- This battery trickle charger and maitainer sae to sae extension cable kit contains all the cables you need to connect solar panels to batteries, controllers, chargers and other power systems. The connector cable is 18AWG. Compatible with battery tender,noco,Schumacher,suaoki and the other brand battery trickle charger and maintainer. [6 Cable Connectors In One Package]-16 feet 18AWG of DC extension wire cord include Battery clamps alligator plugs ,Male cigarette lighter plug,Female cigarette lighter plug,Barrel plug connector,and LED charge indicator(a 12volt tester for DC system).Compatible with other brand SAE adapter. [16FT 18AWG Dual Extension Cable Connectors]- can be used in case the lead wire of your Solar Panel,battery trickle chargers,battery maintainer is not long enough. Connect the Extension cable adapter wire to the lead wire and the 12volt battery chargers. Get the Polarity Reverse Adapters to search asin . [The Male/Female Cigarette Lighter Plugs and 12V Barrel Adapter]- can be used to connect the solar products to various charge controllers and using terminals. [The LED Charge Indicator ]- It is used to determine if the battery charger and maintainer,solar charger,solar power kit is working(has sufficient electricity) or not under direct sunlight. Attach the Charge Indicator to the solar product’s lead wire. The LED light will flashing if there is sufficient power. Product Description 16FT Extension Cable with SAE Quick Connect and Disconnect Plug Adapters For Solar battery Maintainer,Solar Battery Trickle Charger Kit ,Solar Panel Charger Kit,12Volt Battery,Solar Charge Controller Regulators . Extension Cable adaptor wire is an 16 Feet extension wire, just in case the lead wire comes with the solar power products is not long enough. Simply connect the trailer plug from the adaptor wire to the trailer plug from solar products. LED Charge Indicator lead wire is a charging indicator. When connected to an output lead wire from 12v solar panel chargers and 12volt solar power battery charger. The charging indicator will light up(green color) when sensing electricity from the solar chargers / solar power kit. So that the final users will know if the solar panel is functioning or not. Simply connect the trailer plug from the adaptor wire to the trailer plug from solar chargers .Note: Solar chargers / solar power kits will function only when exposed under direct sunlight.When it is tested outside under strong sunlight, the LED light indicator maybe a little bit weak compare to the strong sunlight.You can use your hand or something else to block the sunlight to check if the LED is light on! Keep installation area clean and well lit. Install out of reach of children. Use in 12Volt DC systems only. Solar Panel voltage is around 18Volt. When using the Battery Clamp , the Red (positive “+” ) clamp should be connected to the positive battery terminal and the Black (negative “-” ) clamp should be connected to the negative battery terminal. Follow indicated polarity for all connections and verify all connections are secure before use. Clean and inspect all adapters and the Solar Power system used with these adapters MONTHLY, or more frequently to maintain peak efficiency. Inspect the general condition of the Solar Power System, including solar panel, 12v batteries,solar controllers, and mounting connections. Check for loose hardware, wiring insulation damage or weathering, cracked glass, open housing, cracked or broken parts, loose or corroded contacts, and any other condition that may affect its safe operation.

Price: 22.74 USD

Location: Denver, Colorado

End Time: 2024-10-04T18:41:37.000Z

Shipping Cost: N/A USD