10pcs NE555P NE555 IC 555 High Precision Oscillator Timer DIP-8 Chip USA

Description: Timing From Microseconds to HoursAstable or Monostable OperationAdjustable Duty CycleTTL-Compatible Output Can Sink or Source up to 200 mADesigned To Be Interchangeable WithSignetics NE555, SA555, SE555, and SE555C Description:These devices are precision monolithic timing circuits capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. RESET can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset and the output goes low. When the output is low, a low-impedance path is provided between DISCH and ground. The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs. The NE555 is characterized for operation from 0°C to 70°C. The SA555 is characterized for operation from –40°C to 85°C. The SE555 and E555C are characterized for operation over the full military range of –55°C to 125°C. Package Included:20pcs NE555P NE555 IC 555 High Precision Oscillator Timer DIP-8 Chip

Price: 2.84 USD

Location: Addison, Illinois

End Time: 2024-07-22T03:05:41.000Z

Shipping Cost: N/A USD