Description: 10/20/30A PWM Solar Panel Battery Regulator Charge Controller 12V or 24V Batteries with Dual USB Output - Black CaseThis PWM Solar Battery Charge Controller automatically manages and regulates the voltage and current to the battery from the solar panel(s). It incorporates short-circuit, open-circuit, reverse polarity, and overload protection in order to ensure that the batteries are not overcharged and that power isn't discharged from the batteries to the solar panels during shaded or dark conditions and drain the batteries. It comes with USB ports to charge for your phone and other electronic devices directly from the controller.This solar charge controller is perfect for smaller home, cabin, RV and other remote and portable solar systems.FeaturesThis controller is designed for use only with 12V and 24V lead-acid batteries. It cannot be used with lithium-ion, nickel-cadmium or other battery types.Regulates the voltage from the solar panels going to the batteries.Built-in industrial master chip to control the charge and discharge process with adjustable parameters to prolong the battery life cycle and stabilize power to the load.3-stage PWM charge management with short-circuit protection, open-circuit protection, and reverse polarity protection.Dual USB outputs with 5V/2A maximum power (across both outputs) can charge mobile phones, tablets, and other USB-powered devices.LCD display with backlight function displays status and parameters.Dual MOSFET reverse current protection, low power dissipation.Easy to install and operate, suitable for home, industrial, commercial, remote and portable solar energy systems.SpecificationsSize: Approx.13.3 x 7 x 3.5 cm/ 5.24 x 2.76 x 1.38 inch (LxWxH)Battery Voltage: 12V/ 24V (Auto recognition)Input Charging Current: 10A / 20A / 30A dependent upon the model chosen. The maximum panel output current should be about 25% less than the controller's maximum input current rating. For example, with a single 6A 100W panel, use the 10A model. Two 6A panels (12A total) should use the 20A model. If in doubt, use the higher current model, i.e. if the maximum panel output current is 9A, use the 20A model rather than the 10A modelMaximum Discharge Current: 10AInternal power consumption: =10mAOver Charge Protection:B01 Sealed: 14.4V/28.8VB02 Gel: 14.2V/28.4VB03 Flood: 14.6V/29.2VOver Charge Float: 13.7V/27.4VCharge Recovery Voltage: 12.6V/25.2VOver-discharge Protection: 10.7V/21.4VOver-discharge Recovery: 12.6V/25.2VUSB output: 5V/2A12V batteries should be used with solar panels capable of generating 18V-25V With 12V batteries, the maximum panel voltage must not exceed 25V24V batteries should be used with solar panels capable of generating 36V-50V With 24V batteries, the maximum panel voltage must not exceed 50VMaximum Power Output:10A (12V / 120W (MAX) 24V / 240W (MAX) )20A (12V / 240W (MAX) 24V / 480W (MAX) )30A (12 V / 360W (MAX) 24V / 720W (MAX) )Operating Temperature: -35 ~ +60CStorage Temperature: -35 ~ +60C Operation:Make sure your battery has enough voltage (typically 10V or more) to power on the controller and to recognize the battery type. The battery cables should be as short as possible to minimize losses.The regulator is only suitable for lead-acid batteries: Open, AGM, Gel. It is not suitable for nickel metal hydride, lithium ion or other battery types. Connection:Connect the battery to the charge controller first. The controller's LCD should turn on. Do not proceed if the LCD display does not turn on! Connect the photovoltaic module to the charge controller.Connect your load (the device(s) you are going to power) to the charge controller.Reverse these steps when disconnecting or uninstalling the controller.Package Includes:1X (1 Piece) 10A, 20A or 30A PWM Solar Charge Controller - Black Case Operating InstructionsNOTE: The solar panel and battery in the photo are shown to illustrate the controller's interconnections only. They are not included with the charge controllerWe also carry these PWM solar charge controllers with a BLUE faceplate rather than BLACK: 10/20/30/40A PWM Solar Panel Battery Regulator Charge Controller USB 12V 24V Blue Faceplate.Get it faster! Stocks and ships from our US Colorado office for quick delivery.Contact us for quantity/OEM discounts.We provide FREE USPS First Class Shipping with Tracking - Not Economy Shipping
Price: 10.89 USD
Location: Fort Collins, Colorado
End Time: 2024-03-05T15:38:56.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Current Rating: 10A / 20A / 30A Input
Model: 10A / 20A / 30A
Country/Region of Manufacture: China
Connector Type: Screw terminal
Maximum Input Power: 120W to 720W (Depending on model)
Wattage: 120-720 W
Current Type: DC
System Configuration: Off-Grid
Maximum Input Voltage: 18-25V with 12V battery, 36-50V with 24V battery
Power Source: Solar
Type: Solar Charge Controller
Features: All Daylight Conditions, Automatic Voltage Detection
Color: Black
Protection Properties: Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 120-720 W
Current Output: 10A
Brand: Unbranded
Solar Technology: N/A
Application: Agriculture/Farming, Back-up Power, Camping/Hiking, Home/Garden, Marine, Recreational Vehicle (RV)
Charging Mode: PWM (Pulse Width Modulation)
Voltage: 12V / 24V
Available Variations
Color: 10A 12/24V
Price: 10.89 USD
Available Quantity: 51
Quantity Sold: 48
Color: 20A 12/24V
Price: 11.89 USD
Available Quantity: 33
Quantity Sold: 29
Color: 30A 12/24V
Price: 12.89 USD
Available Quantity: 97
Quantity Sold: 93