Description: Keep Your Aquarium's Temperature Steady with Bulk Reef Supply's Heater Temperature Controller!The easy to program temperature controller lets you connect up to two heaters to keep your aquarium's temperature super stable. The dual-screen LCD display lets you easily see the controller's setpoint along with the actual temperature of the aquarium. Programming the controller only takes a minute and doesn't require any special programming knowledge to get it right. Precise Digital ReadoutReplaceable Temperature ProbeDual Heater ControlEasy to CalibrateAdjustable Hysteresis0.3 Degree Control PrecisionKeeping a reef tank's temperature steady is crucial to long-term success and the BRS Heater Controller lets you set the temperature anywhere between 58°F and 99.9°F and then will keep it within 0.3°F of the controllers set temperature. With a properly sized heater, your aquarium can keep the temperature swings down to a minimum, while ensuring a long life for your heater. As your aquarium heats up, the controller will allow the water temperature to go past the set temperature by 0.3°F, at which point the controller will turn your heaters off, and the temperature will start to fall. Once you aquarium's water temperature falls 0.3°F below the set temperature, the heaters will turn back on, heating your aquarium water. Replaceable Temperature ProbeThe tank's temperature is sensed through a replaceable probe that is 72" long and only takes a few seconds if it ever needs to be replaced. The low-cost probe is perfect for conditions like saltwater aquariums, where deposits and algae can grow on the probe that requires vigorous cleaning, and ultimately being the main failure point. If you ever notice the temperature starts to drift or not hold a calibration it is usually a good sign that the probe needs to be replaced. Maximum Heater Size: 1,200 Watts @ 120VACThe Bulk Reef Supply Aquarium Heater Controller can handle up to 10 amps of current which is equivalent to 1200 Watts with a supply voltage of 120 volts. The 1200 Watt maximum output can be split between the two outlets allowing you to plug two smaller heaters into each plug, or a single larger heater into just one of the plugs. We highly suggest using two smaller heaters, which has multiple advantages over a single larger heater. Specifications:Control Range - 58°F - 99.9°FControl Precision - 0.3°F up to 15°F (0.15°F - 7.5°F hysterisis)Display Resolution - 0.1°FInput Power - 120VAC @ 60HzMax Output Power - 10 amps @ 120VACReplaceable Temperature Probe Length - 72"Outlet Dongle Length - 12"Power Cord Length - 60"Warranty - 1 Year What's Included?1x BRS Aquarium Heater Controller1x Replaceable Heater Controller Probe (pre-installed)
Price: 29.99 USD
Location: Vernon Center, Minnesota
End Time: 2024-09-01T00:36:08.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Inkbird
Unit Type: Unit
Control Style: Digital
Model: 212309
MPN: 212309
