0.96 inch / 1.3 inch IIC SPI Serial 128X64 White OLED LCD LED Display Module

Description: Backlight conditions: No backlight is required, and the display unit can emit light by itself. High resolution: 128*64 (same as LED12864, but this product is more dense) Large viewing angle: greater than 160 degrees (almost a plane) Support chip: fully compatible with , 51 series, MSP430 series, STM32/, CSR chips, etc. Low power consumption: 0.08W when the full screen is lit, and 0.06W for normal full screen display of Chinese characters (much lower than TFT, LCD and other technologies) Wide voltage: without any modification, directly support 3V~5V DC Working temperature: 40℃~70℃ I0 occupies less port: using SPI or IIC communication mode, only four 10 ports can be driven at most. 0.96" 1.3" IIC SPI Serial 128X64 White OLED LCD LED Display Module for OLED (Organic Light-Emitting Diode): Organic Light Emitting Diode, also known as organic electric laser display, OLED display technology has the characteristics of self-luminescence, using thin organic material coating and glass substrate, when there is current passing through, these organic materials It will emit light, and the OLED display screen has a large viewing angle and low power consumption. Because OLED has self-illumination at the same time, does not need a backlight (it will not light up only when it is powered on, it will light up when the driver and wiring are correct), high contrast, thin thickness, wide viewing angle, fast response, and can be used for flexible panels. , The use of a wide temperature range, structure and simple process and other excellent characteristics. The 12864 screens that were first contacted were all LCD, which required a backlight and had high power consumption, while OLED had low power consumption and was more suitable for small systems. Due to the difference between the two luminescent materials, the display effect of OLED is better in different environments. The module power supply can be 3.3V or 5V, and there is no need to modify the module circuit. The OLED screen has multiple control commands, which can control the brightness, contrast, and switch boost circuits of the OLED. Easy to operate, rich in functions, can display Chinese characters, ASCII patterns and so on. At the same time, in order to facilitate the application on the product, 4 M3 fixing holes are reserved to facilitate the user to fix it on the chassis. Note: Please connect correctly! Do not reverse the positive and negative connections, which will burn the electronic devices. The display screen does not have a font chip, and the display data is generated by the picture or Chinese character modulo software. Backlight conditions: No backlight is required, and the display unit can emit light by itself. High resolution: 128*64 (same as LED12864, but this product is more dense) Large viewing angle: greater than 160 degrees (almost a plane) Support chip: fully compatible with , 51 series, MSP430 series, STM32/, CSR chips, etc. Low power consumption: 0.08W when the full screen is lit, and 0.06W for normal full screen display of Chinese characters (much lower than TFT, LCD and other technologies) Wide voltage: without any modification, directly support 3V~5V DC Working temperature: 40℃~70℃ I0 occupies less port: using SPI or IIC communication mode, only four 10 ports can be driven at most. Features: OLED is widely used in smart phones, smart car cameras, real-time display pictures, battery management equipment, IPC controllers, MP3/MP4 players, feature phones, portable medical equipment, games, etc., power saving, low power consumption, and clear display. Pin Description 7-pin OLED display- GND: power ground- VCC: Power positive 3.3V- DO: SPI clock line for SPI interface, IIC clock line for IIC interface- D1: SPI data line for SIP interface, IIC data line for IIC interface- RES: ILED reset, OLED needs a reset after power on- DC: SPI data/command selection pin, used to set IIC address when IIC interface- CS: OLED SPI chip select, active low 4-pin OLED display- GND: power ground- VCC: positive power supply (power supply 3.3-5V)- SCL:IIC clock line- SDA:IIC data cable- Important note: OLED display is different from LCD, OLED is self-luminous, so there is no backlight, the screen will not have any response when only power is applied, and the display must be properly operated by the program. You can find more products in different material, type, color , sizes and shapes in our shop! If you have special needs, please contact us, we can customize according to your needs! Package Including: According to your choice. Guarantee: Good Good Good quality. Buy with confidence! We maintain high standards of excellence and strive for customer satisfaction! Shipping We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Contact us / Feedback Please contact us via ebay messages. A response will not be returned via email. All ebay messages will be answered as fast and efficient as possible. Please take a look at more great items offered in my store, and we do hope you enjoy your shopping experience. On Feb 2, 2024 at 04:43:06 PST, seller added the following information:

Price: 2.45 USD

Location: Shenzhen, GD

End Time: 2025-01-23T18:14:38.000Z

Shipping Cost: 3.99 USD